| Product Image |
Item Name- |
Price |
 |
Supercharge your Beast 3D!!! This is the Beast male connector wired to THREE (serial) 1S Lipo Female connectors. WARNING - Your... |
$8.99
Add:
|
 |
Supercharge your Beast 3D!!! This is the Beast male connector wired to THREE (serial) MCP-X Lipo Female connectors. WARNING - Your... |
$9.99
Add:
|
 |
Use your existing 2S Lipos on your Beast This is the Beast male connector wired to a "JST" female connector Note - make sure the polarity of your... |
$5.99
Add:
|
 |
Use your 2S Lipos on your Beast!!! This is the Beast male connector wired to a Mini-Deans-Clone connector Use this converter ONLY if your Mini-Deans... |
$4.79
Add:
|
 |
Use your 2S Lipos on your Beast!!! This is the Beast male connector wired to a Mini-Deans-Clone connector Use this converter ONLY if your Mini-Deans... |
$4.79
Add:
|
 |
Adapt just about ANY small 2S battery for use in your Beast or Blade 130X! If your small 2S batteries have the Align style balance taps (by far the... |
$5.99
... more info
|
 |
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with ~3" of 26... |
$2.89
Add:
|
|
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with 6" of 26... |
$3.59
Add:
|
|
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with ~3" of 28... |
$2.69
Add:
|
|
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with 6" of 28... |
$3.29
Add:
|
 |
Battery connector KIT for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side only NO WIRES Note that... |
$1.19
Add:
|
 |
2-pin female housing with 3" of 26 gauge wire This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.89
Add:
|
|
2-pin female housing with 6" of 26 gauge wire This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.99
Add:
|
 |
2-pin female connector This is the TX/Charger-side connector on the popular DX7, DX7S, and DX8 Transmitters, and many other Spektrum and JR TX's. Use... |
$1.19
Add:
|
 |
2-pin female housing with 6" of 26 gauge wire, and banana connectors This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters,... |
$5.99
Add:
|
 |
2-pin male housing with 3" of 26 gauge wire This is the battery-side connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.59
Add:
|
|
2-pin male housing with 6" of 26 gauge wire This is the battery-side connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.69
Add:
|
 |
2-pin male housing and 3 pins (one for practice crimping) This is the battery-side connector on the popular DX7, DX7S, and DX8 Transmitters, and many... |
$1.19
Add:
|
 |
Converter to allow you to plug a JST-connected lipo into a standard Receiver JST-RCY Female one one end, standard servo on the other NOTE - USE AT... |
$4.19
Add:
|
 |
The ubiquitous little red JST connector! Extension - male and female with 26 gauge wire MAKE SURE TO SELECT LENGTH BELOW |
$4.99
... more info
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the negative part of... |
$5.99
Add:
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the positive part of... |
$5.99
Add:
|
 |
Use your existing JST-connected Lipos on your Umx planes! This is the familiar red JST-RCY female connector (male pins but female housing) wired to a... |
$5.99
Add:
|
 |
The ubiquitous little red JST connector! Female side with ~4" of 22 gauge wire This is generally on the RX or charger side - but be certain to check... |
$2.99
Add:
|
 |
The ubiquitous little red JST connector! Female side with ~6" of 22 gauge wire and banana jacks This is generally on the RX or charger side - but be... |
$5.99
Add:
|
|
The ubiquitous little red JST connector! Female side with ~4" of 26 gauge wire This is generally on the RX or charger side - but be certain to check... |
$2.79
Add:
|
 |
The ubiquitous little red JST connector! Female kit - one housing and three pins, one extra (like all our kits) so you can practice crimp before... |
$1.29
Add:
|
 |
The ubiquitous little red JST connector! Male side with ~4" of 22 gauge wire This is generally on the Battery side - but be certain to check your... |
$2.99
Add:
|
 |
The ubiquitous little red JST connector! Male side with ~4" of 26 gauge wire This is generally on the Battery side - but be certain to check your... |
$2.79
Add:
|
 |
Unique battery adapter Use two standard 1S lipo batteries in series to an ESC that has a standard red JST/BEC plug. One red male JST/BEC connector to... |
$5.99
Add:
|
 |
The ubiquitous little red JST connector! Male kit - one housing and three pins, one extra (like all our kits) so you can practice crimp before... |
$1.29
Add:
|
 |
Supercharge your custom high-speed plane!!! This is the JST male connector wired to FOUR (serial) 1S Lipo Female connectors. I have no idea why... |
$10.99
Add:
|
 |
Charge your 1S Lipos directly from your balance connector (if your charger does this) or balance them with an external balancer. This is the JST-XH... |
$5.00
Add:
|
 |
Lipo balance tap kit - one plastic housing plus pins plus an extra pin for practice. These are the Align style, by far the most popular. Used on... |
$1.00
Add:
|
 |
Lipo balance tap kit - FEMALE side, like what would be on a charger. These are the Align style, by far the most popular. Used on Mystery, etc Use... |
$1.00
Add:
|
