This is one single wire from a standard servo connector, with shrink wrap on each end.

Use for connecting just signal wires from your RX to flight controller board. Comes in white only.

Two choices for wire size - 26 gauge or 28 gauge.

Length is BETWEEN the connectors, so overall length is what you request plus ~1 inch. (length may vary 1/4" either way)

Many choices for length, from 2" all the way to 12".

These are NOT cheap imported cables. Each one is hand-made here at RCConnectors with your choice of wire and length needed without adding extra weight.

MAKE SURE TO CHOOSE WEIGHT AND LENGTH BELOW